Call us: 01227 366633 or 01634 366040 mail@mbskent.com

MBS Liquid Screed

Self-levelling liquid screed

MBS LIQUID SCREED offers an environmentally friendly solution which is at the forefront of screed technology, quicker to install and with rapid drying times. 

As a family business with 35 years experience in the Timber and Builders Merchants industry we already offer an extensive range of products and services which also includes Ready Mix Concrete to order and on site, Concrete Pumping and Aggregates. Liquid screed adds a further dimension to our range of services.

The advantages of liquid screed over traditional floor screed include speed of application, excellence of surface finish, attainable accuracy of placement and finishing, reduction in thickness. A self-compacting, self-levelling, flowing product which can be placed at up to 10 times faster.

Benefits and advantages of liquid screed

Speedy Application

Up to 2000m² can be installed by 3 to 4 operatives in 1 day. A typical day would see 500 to 750m² laid compared to a maximum 200m² of traditional screed.

Rapid Early Strength

Allows early trafficking, typically within 24 to 48 hours, compared to 3 to 7 days for cement / sand screed.

High Dimensional Stability

A high degree of dimensional stability means that cracking within the screed is vastly reduced and curling almost totally eliminated. These are two issues commonly seen on traditional site mixed screeds.

Thermally Efficient

Improved thermal efficiency when used with underfloor heating compared to traditional screed. This is because of the flowing nature of Supaflo which fully encapsulates the heating pipes.

Delivered Ready

Mixed Delivered to the job site in mixer trucks in a ‘ready to use’ condition, thus eliminating the time and space required for site mixing and concerns relating to manual handling for site operatives.

Improved Flexural Strength

Reduced section thickness due to improved flexural strength, 75mm of traditional screed is frequently replaced with 40mm of Supaflo, which improves drying times, thermal insulation values and cost.

No Need For Stress Relief

Large areas can be laid without the need for stress relief / movement joint – 1600 m². Cement / sand screed is usually partitioned in to 30 to 40m² bays.

REQUEST A QUOTATION

Please fill in the form to request further details or prices of any of our products

Or call us on 01227 366633
or 01634 366040

4 + 13 =